[1] Bielecki, Z., et al. (2012). "Sensors and systems for the detection of explosive devices-an overview." Metrology and Measurement Systems 19(1): 3-28.
[2] Mokalled, L., et al. (2014). "Sensor Review for Trace Detection of Explosives." Int. J. Sci. Eng. Res 5(6): 337-350.
[3] Caygill, J. S., et al. (2012). "Current trends in explosive detection techniques." Talanta 88: 14-29.
[4] Albert, K. J. and D. R. Walt (2000). "High-speed fluorescence detection of explosives-like vapors." Analytical chemistry 72(9): 1947-1955.
[5] Smith, R. G., et al. (2008). "A review of biosensors and biologically-inspired systems for explosives detection." Analyst 133(5): 571-584.
[6] Harper, R. J., et al. (2005). "Identification of dominant odor chemicals emanating from explosives for use in developing optimal training aid combinations and mimics for canine detection." Talanta 67(2): 313-327.
[7] Ewing, R. G., et al. (2001). "A critical review of ion mobility spectrometry for the detection of explosives and explosive related compounds." Talanta 54(3): 515-529.
[8] Fereja, T. H., et al. (2013). "A recent review on chemiluminescence reaction, principle and application on pharmaceutical analysis." ISRN Spectroscopy 2013.
[9] Lewis, M. L., et al. (2005). "Raman spectrometry of explosives with a no-moving-parts fiber coupled spectrometer: a comparison of excitation wavelength." Vibrational spectroscopy 38(1): 17-28.
[10] Pan, X., et al. (2006). "Method optimization for quantitative analysis of octahydro-1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetrazocine (HMX) by liquid chromatography-electrospray ionization mass spectrometry." Talanta 70(2): 455-459.
[11] Nimal, A., et al. (2009). "Development of handheld SAW vapor sensors for explosives and CW agents." Sensors and Actuators B: Chemical 135(2): 399-410.
[12] Dobrokhotov, V., et al. (2012). "Thermal and optical activation mechanisms of nanospring-based chemiresistors." Sensors 12(5): 5608-5622.
[13] Wang, F., et al. (2008). "Carbon nanotube/polythiophene chemiresistive sensors for chemical warfare agents." Journal of the American Chemical Society 130(16): 5392-5393.
[14] Grate, J. W. (2008). "Hydrogen-bond acidic polymers for chemical vapor sensing." Chemical reviews 108(2): 726-745.
[15] Schnorr, J. M., et al. (2013). "Sensory Arrays of Covalently Functionalized Single‐Walled Carbon Nanotubes for Explosive Detection." Advanced Functional Materials 23(42): 5285-5291.
[16] Yuan, W. and G. Shi (2013). "Graphene-based gas sensors." Journal of Materials Chemistry A 1(35): 10078-10091.
[17] Bai, H. and G. Shi (2007). "Gas sensors based on conducting polymers." Sensors 7(3): 267-307.
[18] Wang, D. (2014). Trace Explosive Sensor Devices Based on Semiconductor Nanomaterials, University of Washington.
[19] Becerril, H. A., Mao, J., Liu, Z., Stoltenberg, R. M., Bao, Z., & Chen, Y. (2008). Evaluation of solution-processed reduced graphene oxide films as transparent conductors. ACS nano, 2(3), 463-470.
[20] Bai, H., & Shi, G. (2007). Gas sensors based on conducting polymers. Sensors, 7(3), 267-307.
[21] Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., ... & Ruoff, R. S. (2007). Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide. carbon, 45(7), 1558-1565.
[22] Boehm, H. P., Clauss, A., Fischer, G. O., & Hofmann, U. (1962). Das adsorptionsverhalten sehr dünner kohlenstoff‐folien. Zeitschrift für anorganische und allgemeine Chemie, 316(3‐4), 119-127.
[23] Bourlinos, A. B., Gournis, D., Petridis, D., Szabó, T., Szeri, A., & Dékány, I. (2003). Graphite oxide: chemical reduction to graphite and surface modification with primary aliphatic amines and amino acids. Langmuir, 19(15), 6050-6055.
[24] Kotov, N. A., Dékány, I., & Fendler, J. H. (1996). Ultrathin graphite oxide–polyelectrolyte composites prepared by self‐assembly: Transition between conductive and non‐conductive states. Advanced Materials, 8(8), 637-641.
[25] Pham, V. H., Cuong, T. V., Hur, S. H., Oh, E., Kim, E. J., Shin, E. W., & Chung, J. S. (2011). Chemical functionalization of graphene sheets by solvothermal reduction of a graphene oxide suspension in N-methyl-2-pyrrolidone. Journal of Materials Chemistry, 21(10), 3371-3377.
[26] Ren, P. G., Yan, D. X., Ji, X., Chen, T., & Li, Z. M. (2010). Temperature dependence of graphene oxide reduced by hydrazine hydrate. Nanotechnology, 22(5), 055705.
[27] Ren, P. G., Yan, D. X., Ji, X., Chen, T., & Li, Z. M. (2010). Temperature dependence of graphene oxide reduced by hydrazine hydrate. Nanotechnology, 22(5), 055705.
[28] Fowler, J. D., Allen, M. J., Tung, V. C., Yang, Y., Kaner, R. B., & Weiller, B. H. (2009). Practical chemical sensors from chemically derived graphene. ACS nano, 3(2), 301-306.
[29] Niu, F., Liu, J. M., Tao, L. M., Wang, W., & Song, W. G. (2013). Nitrogen and silica co-doped graphene nanosheets for NO 2 gas sensing. Journal of Materials Chemistry A, 1(20), 6130-6133.
[30] Chung, M. G., Kim, D. H., Lee, H. M., Kim, T., Choi, J. H., kyun Seo, D., ... & Kim, Y. H. (2012). Highly sensitive NO2 gas sensor based on ozone treated graphene. Sensors and Actuators B: Chemical, 166, 172-176.
[31] Robinson, J. T., Perkins, F. K., Snow, E. S., Wei, Z., & Sheehan, P. E. (2008). Reduced graphene oxide molecular sensors. Nano letters, 8(10), 3137-3140.
[32] Su, P. G., & Shieh, H. C. (2014). Flexible NO2 sensors fabricated by layer-by-layer covalent anchoring and in situ reduction of graphene oxide. Sensors and Actuators B: Chemical, 190, 865-872.